Mechanical Engineer
Precision Optics Corporation is looking for Engineers and Technicians who are excited to design and build cutting edge optical and electro-optical products for the Medical, Industrial, and Defense industries.
Founded in 1982 and headquartered out of Gardner, MA, with divisions in Portland, ME and El Paso, Tx, POC specializes in:
Optically based medical devices supporting revolutionary minimally invasive procedures, tests, and therapies.
Novel micro-optical components and high-precision micro-assemblies for industrial and defense applications.
Volume build-to-print and build-to-specification optics from the UV to Infrared for all market segments.
POC's locations outside Boston in communities with roughly 1/3 lower cost of living, offer competitive salaries and high tech careers in the rapidly growing Medical and Imaging Product markets.
Primary Function Generate engineering solutions supporting product requirements Develop and execute test protocols Component/material selection, process determination Support generation of DHF, including documentation, risk analysis, etc.
Participate in client and vendor meetings Support design control standards in QMS Principal Responsibilities Design and draw CAD models for parts and assemblies Design and document mechanical solutions Design and/or oversee detail drawings Build and maintain electronic part/assembly library Interact with other disciplines and departments Material and process selection Provide tolerance design and stack-up analysis Education Requirements Technical Degree or Certificate Program in a related field and minimum 5 years relevant experience, or BS in a related field and minimum 3 years relevant experience.
SkillsRequired:
Skilled in the use of solid modeling CAD tools ideally SolidWorks.
High level modeling skills to quickly formalize geometries in CAD.
Familiarity with design dimensioning and tolerancing methods and conventions (e.
g.
true-position dimensioning, geometric tolerancing, etc.
), ANSI and / or ISO drawing standards.
Understanding of mechanical fit tolerances, tolerance stack-ups, and an ability to perform worst-case and statistical tolerance analyses on mechanical assemblies.
Direct experience with a broad range of component fabrication and metrology methods Familiar with the material and machining properties of conventional materials:
steel, aluminum, plastic, glass, adhesives and potting compounds Desired:
CAD documentation of Electrical Components and PCBAs Familiarity with mechanical part inspection methods and sampling schemes Skilled in mechanical metrology and test tools including CMM's, ESS chambers, etc.
Knowledge of advanced materials:
alloys, composites, ceramics, thermoplastics, epoxies, etc.
Knowledge of material treatments and coatings:
Plating, painting, etching, etc.
Knowledge of advanced manufacturing methods:
Additive manufacturing, EDM, rapid prototyping, casting and molding, laser cutting, laser welding, injection molding, soldering, etc.
Documentation SkillsRequired:
Understanding of Configuration Management and Document Control Systems, e.
g.
in the context of MIL-STD-973, ISO 9001:
7.
5.
3, ISO 13485, etc.
Familiarity with Engineering Change workflows in an Engineering Development and Production Release environment, understanding of approval roles:
author (drawn by), check, quality, etc.
Creation of Templates in CAD, ideally SolidWorks Desired:
Product Data Management (PDM) tool familiarity, ideally SolidWorks PDM / EPDM Use of metadata and other methods to expedite and automate documentation in SolidWorks or Microsoft Office products.
Alignment of PDM and MRP data, e.
g.
synchronization of BOMs General Skills:
Good verbal and written communication, clear, concise Attention to details across all element of a technical document / drawing Motivated and self-directed, this role will interact across all departments in order to complete tasks PI229273956 Recommended Skills Assembly And Installation Attention To Detail Automation Cad Communication Composite Materials Estimated Salary: $20 to $28 per hour based on qualifications.
Founded in 1982 and headquartered out of Gardner, MA, with divisions in Portland, ME and El Paso, Tx, POC specializes in:
Optically based medical devices supporting revolutionary minimally invasive procedures, tests, and therapies.
Novel micro-optical components and high-precision micro-assemblies for industrial and defense applications.
Volume build-to-print and build-to-specification optics from the UV to Infrared for all market segments.
POC's locations outside Boston in communities with roughly 1/3 lower cost of living, offer competitive salaries and high tech careers in the rapidly growing Medical and Imaging Product markets.
Primary Function Generate engineering solutions supporting product requirements Develop and execute test protocols Component/material selection, process determination Support generation of DHF, including documentation, risk analysis, etc.
Participate in client and vendor meetings Support design control standards in QMS Principal Responsibilities Design and draw CAD models for parts and assemblies Design and document mechanical solutions Design and/or oversee detail drawings Build and maintain electronic part/assembly library Interact with other disciplines and departments Material and process selection Provide tolerance design and stack-up analysis Education Requirements Technical Degree or Certificate Program in a related field and minimum 5 years relevant experience, or BS in a related field and minimum 3 years relevant experience.
SkillsRequired:
Skilled in the use of solid modeling CAD tools ideally SolidWorks.
High level modeling skills to quickly formalize geometries in CAD.
Familiarity with design dimensioning and tolerancing methods and conventions (e.
g.
true-position dimensioning, geometric tolerancing, etc.
), ANSI and / or ISO drawing standards.
Understanding of mechanical fit tolerances, tolerance stack-ups, and an ability to perform worst-case and statistical tolerance analyses on mechanical assemblies.
Direct experience with a broad range of component fabrication and metrology methods Familiar with the material and machining properties of conventional materials:
steel, aluminum, plastic, glass, adhesives and potting compounds Desired:
CAD documentation of Electrical Components and PCBAs Familiarity with mechanical part inspection methods and sampling schemes Skilled in mechanical metrology and test tools including CMM's, ESS chambers, etc.
Knowledge of advanced materials:
alloys, composites, ceramics, thermoplastics, epoxies, etc.
Knowledge of material treatments and coatings:
Plating, painting, etching, etc.
Knowledge of advanced manufacturing methods:
Additive manufacturing, EDM, rapid prototyping, casting and molding, laser cutting, laser welding, injection molding, soldering, etc.
Documentation SkillsRequired:
Understanding of Configuration Management and Document Control Systems, e.
g.
in the context of MIL-STD-973, ISO 9001:
7.
5.
3, ISO 13485, etc.
Familiarity with Engineering Change workflows in an Engineering Development and Production Release environment, understanding of approval roles:
author (drawn by), check, quality, etc.
Creation of Templates in CAD, ideally SolidWorks Desired:
Product Data Management (PDM) tool familiarity, ideally SolidWorks PDM / EPDM Use of metadata and other methods to expedite and automate documentation in SolidWorks or Microsoft Office products.
Alignment of PDM and MRP data, e.
g.
synchronization of BOMs General Skills:
Good verbal and written communication, clear, concise Attention to details across all element of a technical document / drawing Motivated and self-directed, this role will interact across all departments in order to complete tasks PI229273956 Recommended Skills Assembly And Installation Attention To Detail Automation Cad Communication Composite Materials Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
